|
公司引進意大利STILMAS雙管板多效蒸餾水機生產技術進行生產的，該機屬世界先進水平。機型刻分為：控制方式為手動、PLC自動、全自動。
蒸汽進入多效蒸餾水機第一效，在對蒸餾水機加熱的同時，其污染滲漏也可能存在。因此，對多效蒸餾水機第一效的設計制造應采取雙管板技術結構，以保證蒸餾水機在制作蒸餾水時不被污染。而雙管板是指脹管板和焊管板雙重結構，在脹管板和焊管板之間，有10mm左右的間隙，如果加熱蒸汽有泄露，則從脹管板一端滲出蒸汽，如果進料水一端有泄露，則從焊管板一端滲出水液。這樣即可以有效防止?jié)B漏污染，也可及時發現泄漏故障。
Latest introduction
of italian STILMAS Multi-Effect Distiller
Techniques in production, which is on the
leading position in the world now, it was
controlled in modes of manually, PLC
automatically and fully automatically.
Steam entering the first effect of
multi-effect distilled water machine, in
distilled water heating at the same time, its
pollution leakage may also exist. Therefore, the
first effect of multi-effect distilled water
machine design and manufacture dual-Board
structure should be taken to ensure that
machines in the production of distilled water
distilled water is not contaminated. Double
tube-plate refers to the dual structure of tube
and pipe Panel, between the tube and pipe Panel,
10MM gap, if heated steam leaks, from one end of
the tube plates oozing steam, if the feed water
leak at one end, from one end of the pipe
leaking water. So you can effectively prevent
leakage pollution, may also reveal faults were
found in a timely manner.
 |
